300
Anthracite burning convector stove.
ESSE 300 series inset convector stoves provide a unique solution to convert an inefficient open fire into an economical multi-fuel stove, improving the efficiency of an open fire by up to 400%.
Convector stoves were pioneered by ESSE back in Victorian times and the first inset convector appeared as a 300 in 1955 - this had preheated secondary air to keep the mica window panes nice and clean. The firebox sits inside a second outer casing with a cavity in between the two. Cool air from the room is drawn in at the base of the stove and heated before rising out of the top of the stove into the room. This process also means that the outer surface of the stove, while still very hot, is much less likely to burn than an ordinary stove. Non convection stoves heat by radiation which only travels in straight lines, but ESSE convector stoves emit a continuous gentle stream of hot air which can evenly heat every nook and cranny of a room.
The award winning 300 has an operating range of upto 4.5kW/h and fits straight into a standard fireplace with virtually no disturbance. It is primarily designed to burn smokeless fuels as it has a small firebox with no secondary air controls.
The 300 is available with a stove black, cast iron Original front only
Features and specification
Fits standard fireplace with brick fire back in place
Suitable for continuous burning
No additional air vents are normally required
Suitable for class 1 chimneys
Operating range up to 4.5kW/h (Anthracite)